Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.
NOTE: To determine correct pulling eye size, obtain the actual innerduct inside diameter (I.D.). The I.D. measurement must be greater than dimension A and smaller than dimension B.
|
|
|
|
Innerduct I.D. |
|
Max OD |
|
Hole Dia. |
|
TangThickness |
|
Tang HoleDiameter |
|
Tang Hole Location |
|
|
Part |
Nominal Size |
|
Range |
|
C |
|
D |
|
E |
|
F |
|
G |
|
|
Number |
(in) |
(mm) |
A - B (in) |
A - B (mm) |
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
|
08914110 |
3/4 |
19 |
.71 - .87 |
18 - 22 |
1.25 |
32 |
0.25 |
6 |
0.38 |
10 |
0.50 |
13 |
0.50 |
13 |
|
08914120 |
1 |
25 |
.93 - 1.06 |
24 - 27 |
1.38 |
35 |
0.25 |
6 |
0.38 |
10 |
0.50 |
13 |
0.50 |
13 |
|
08914130 |
1 1/4 |
32 |
1.06 - 1.43 |
27 - 37 |
1.75 |
44 |
0.38 |
10 |
0.50 |
13 |
0.66 |
17 |
0.63 |
16 |
|
0914140 |
1 1/2 |
38 |
1.37 - 1.68 |
35 - 43 |
2.00 |
51 |
0.38 |
10 |
0.50 |
13 |
0.66 |
17 |
0.63 |
16 |
|
08914150 |
1 3/4 |
44 |
1.68 - 1.81 |
43 - 46 |
2.25 |
57 |
0.38 |
10 |
0.50 |
13 |
0.66 |
17 |
0.75 |
19 |
|
08914160 |
2 |
51 |
1.93 - 2.12 |
49 - 54 |
2.50 |
62 |
0.38 |
10 |
0.50 |
13 |
0.81 |
21 |
0.75 |
19 |
Our Tools for Success
We are proud to be an active contributor to our local communities and to belong to the following professional organizations.
this site and its contents are
© 2024 Jubb Utility Supply Limited
